Ampetronic EM195 Desktop Microphone

£ 31.32
(-9.99%) £ 28.19
Discontinued Product
Ampetronic EM195 Desktop Microphone
The EM195A has now been discontinued. The superseded version is the ACDTMIC and it can be found here.

The EM195A is a directional electret microphone. It is designed to be connected to unbalanced microphone inputs with bias powering such as those found on the Ampetronic ILD20, ILD100 & CLD1 induction loop amplifiers. The unit is directional, so it can reduce unwanted sound pickup from sources that are not infant of the microphone. 

The desk microphone EM195A is a directional unit providing good sound pickup with reduced ambient noise and reverberation. It has a weighted base for stability when used free standing, alternatively it can be fixed to the edge of an upright panel using the rotational mounting coupling included.

Restrictions on Usage

The EM195A should not be directly connected to balanced or line level inputs, it should only be connected to inputs intended for unbalanced electret microphones with DC bias power.


 Sensitivity  -64dB 3dB at 1kHz (0dB=1V/bar)
 Impedance  Low (approx. 200 ohms)
 Directivity Unidirectional  (Cardioid)
 Frequency Range  20Hz - 16kHz
 Maximum Bias Voltage  10V
 Normal Bias Voltage  1.5V
 Current Consumption 0.3mA max. 
 Signal to Noise Ratio  >60dB
 Stem Length  Approx. 25cm with 25  bend at 15cm from base
 Cable Length  1.8 metres, screened flexible cable
Cable Connector   Mono 3.5mm jack
 Colour  Black